T&A Torque & Angle Series

Industrial tightening may require different control strategies and solutions. The most common cases are: torque control with angle monitoring and angle control with torque monitoring. Kolver Multi-Torque Torque&Angle controller can manage all such strategies, with up to 8 individual P-sets.

The Torque/Angle Control

The main parameters to be controlled are the tightening torque applied to the screw and the rotation angle of the screw, with priority to the torque value. If the torque and angle values found by the system are within the programmed settings, the motor stops automatically and the indication of OK cycle (green led turned on) is given, otherwise an error (red led) is generated.

The Angle Control


The main parameter to be controlled is the rotation angle of the screw. The motor stops automatically when the pre-set angle value has been reached and an indication of OK cycle (green led turned on) is given.
Main features:
• Easy to program user interface screens
• Password protected
• Torque value in Nm or In/lbs
• Angle value in degrees
• 8 individual P-sets for custom rundown strategies including:
- Min/Max torque value
- Min/Max angle value
- Rundown speed
- Slow start/Soft stop
- Hard/soft joint
- Min/Max rundown time
- Max Torque (Threadcutting) if required
- Auto reverse if required
• 6 torque & angle strategies:
- Torque priority: angle count from torque threshold (T) or from remote input (T/I) or from lever input (T/L)
- Angle priority: driver stops when angle is reached from threshold torque (A) or from remote input (A/I) or from lever (A/L)

IMPORTANT: Continuous use over 80% of torque range is not recommended.

***

NEW! EDU2AE/TOP/TA is supplied standard with EDU EXPAND software and an 8Gb USB flash drive.

PC programming (back panel): it is possible to set, change and save all parameters through our new “EDU EXPAND” software for PC. EDU EXPAND communicates with the control unit via miniUSB or RS232.

Saving/programming on USB flash drive (front panel): you can save the results of each screwing operation directly on USB pen drive! It is also possible to upload via USB drive all parameters/programs previously set on “EDU EXPAND”. Just connect your USB to the port and recall the desired programs on the menu. The programs set on control unit can be downloaded on USB and recalled on another unit and on EDU EXPAND, too.
NATO15D/TA
Manual NATO15 ITA ENG 2017
160015/TA1.4 in/oz - 21in/oz350700EDU2AE/TOP/NT/TA
NATO15CA/TA
Manual NATO15 ITA ENG 2017
163015/TA1.4 in/oz - 21in/oz350700EDU2AE/TOP/NT/TA
NATO50D/TA
MANUAL NATO ITA-ENG 2017
160050/TA0.4 - 4.4200700EDU2AE/TOP/NT/TA
NATO50CA/TA
MANUAL NATO ITA-ENG 2017
163050/TA0.4 - 4.4200700EDU2AE/TOP/NT/TA
MITO15D/TA
Manual MITO15  ITA ENG 2017
170015/TA1.7-13.0450850EDU2AE/TOP/TA
MITO15CA/TA
Manual MITO15  ITA ENG 2017
170016/TA1.7-13.0450850EDU2AE/TOP/TA
PLUTO3D/TA
Manual PLUTO Multilanguage 4-2017
130203/TA4.4-26.63701300EDU2AE/TOP/TA
PLUTO3P/TA
Manual PLUTO Multilanguage 4-2017
130204/TA4.4-26.63701300EDU2AE/TOP/TA
PLUTO3CA/TA
Manual PLUTO Multilanguage 4-2017
130303/TA4.4-26.63701300EDU2AE/TOP/TA
PLUTO6D/TA
Manual PLUTO Multilanguage 4-2017
130206/TA7.5-53.1200850EDU2AE/TOP/TA
PLUTO6P/TA
Manual PLUTO Multilanguage 4-2017
130207/TA7.5-53.1200850EDU2AE/TOP/TA
PLUTO6CA/TA
Manual PLUTO Multilanguage 4-2017
133206/TA7.5-53.1200850EDU2AE/TOP/TA
PLUTO10D/TA
Manual PLUTO Multilanguage 4-2017
130211/TA13.3-88.5110600EDU2AE/TOP/TA
PLUTO10P/TA
Manual PLUTO Multilanguage 4-2017
130210/TA13.3-88.5110600EDU2AE/TOP/TA
PLUTO10CA/TA
Manual PLUTO Multilanguage 4-2017
133211/TA13.3-88.5110600EDU2AE/TOP/TA
PLUTO15D/TA
Manual PLUTO Multilanguage 4-2017
130216/TA17.7-132.860320EDU2AE/TOP/TA
PLUTO15P/TA
Manual PLUTO Multilanguage 4-2017
130215/TA17.7-132.860320EDU2AE/TOP/TA
PLUTO15CA/TA
Manual PLUTO Multilanguage 4-2017
133216/TA17.7-132.860320EDU2AE/TOP/TA
PLUTO20CA/SR/TA
Manual PLUTO Multilanguage 4-2017
133221/SR/TA26.6-177.050200EDU2AE/TOP/TA
PLUTO35CA/SR/TA
Manual PLUTO Multilanguage 4-2017
133236/SR/TA26.6-309.840140EDU2AE/TOP/TA
EDU2AE/TOP/TA
Manual EDU 2AE-TOP-E_TA-SW ENG
032000/TOP/TAAny PLUTO../TA
EDU2AE/TOP/NT/TA
Manual EDU 2AE-TOP-E_TA-SW  ENG  2017
031000/TOP/NT/TANATO../TA Series
Model: NATO15D/TA
Manual NATO15 ITA ENG 2017
Code: 160015/TA
Torque in/lbs: 1.4 in/oz - 21in/oz
RPM min: 350
RPM max: 700
To be used with: EDU2AE/TOP/NT/TA
Model: NATO15CA/TA
Manual NATO15 ITA ENG 2017
Code: 163015/TA
Torque in/lbs: 1.4 in/oz - 21in/oz
RPM min: 350
RPM max: 700
To be used with: EDU2AE/TOP/NT/TA
Model: NATO50D/TA
MANUAL NATO ITA-ENG 2017
Code: 160050/TA
Torque in/lbs: 0.4 - 4.4
RPM min: 200
RPM max: 700
To be used with: EDU2AE/TOP/NT/TA
Model: NATO50CA/TA
MANUAL NATO ITA-ENG 2017
Code: 163050/TA
Torque in/lbs: 0.4 - 4.4
RPM min: 200
RPM max: 700
To be used with: EDU2AE/TOP/NT/TA
Model: MITO15D/TA
Manual MITO15  ITA ENG 2017
Code: 170015/TA
Torque in/lbs: 1.7-13.0
RPM min: 450
RPM max: 850
To be used with: EDU2AE/TOP/TA
Model: MITO15CA/TA
Manual MITO15  ITA ENG 2017
Code: 170016/TA
Torque in/lbs: 1.7-13.0
RPM min: 450
RPM max: 850
To be used with: EDU2AE/TOP/TA
Model: PLUTO3D/TA
Manual PLUTO Multilanguage 4-2017
Code: 130203/TA
Torque in/lbs: 4.4-26.6
RPM min: 370
RPM max: 1300
To be used with: EDU2AE/TOP/TA
Model: PLUTO3P/TA
Manual PLUTO Multilanguage 4-2017
Code: 130204/TA
Torque in/lbs: 4.4-26.6
RPM min: 370
RPM max: 1300
To be used with: EDU2AE/TOP/TA
Model: PLUTO3CA/TA
Manual PLUTO Multilanguage 4-2017
Code: 130303/TA
Torque in/lbs: 4.4-26.6
RPM min: 370
RPM max: 1300
To be used with: EDU2AE/TOP/TA
Model: PLUTO6D/TA
Manual PLUTO Multilanguage 4-2017
Code: 130206/TA
Torque in/lbs: 7.5-53.1
RPM min: 200
RPM max: 850
To be used with: EDU2AE/TOP/TA
Model: PLUTO6P/TA
Manual PLUTO Multilanguage 4-2017
Code: 130207/TA
Torque in/lbs: 7.5-53.1
RPM min: 200
RPM max: 850
To be used with: EDU2AE/TOP/TA
Model: PLUTO6CA/TA
Manual PLUTO Multilanguage 4-2017
Code: 133206/TA
Torque in/lbs: 7.5-53.1
RPM min: 200
RPM max: 850
To be used with: EDU2AE/TOP/TA
Model: PLUTO10D/TA
Manual PLUTO Multilanguage 4-2017
Code: 130211/TA
Torque in/lbs: 13.3-88.5
RPM min: 110
RPM max: 600
To be used with: EDU2AE/TOP/TA
Model: PLUTO10P/TA
Manual PLUTO Multilanguage 4-2017
Code: 130210/TA
Torque in/lbs: 13.3-88.5
RPM min: 110
RPM max: 600
To be used with: EDU2AE/TOP/TA
Model: PLUTO10CA/TA
Manual PLUTO Multilanguage 4-2017
Code: 133211/TA
Torque in/lbs: 13.3-88.5
RPM min: 110
RPM max: 600
To be used with: EDU2AE/TOP/TA
Model: PLUTO15D/TA
Manual PLUTO Multilanguage 4-2017
Code: 130216/TA
Torque in/lbs: 17.7-132.8
RPM min: 60
RPM max: 320
To be used with: EDU2AE/TOP/TA
Model: PLUTO15P/TA
Manual PLUTO Multilanguage 4-2017
Code: 130215/TA
Torque in/lbs: 17.7-132.8
RPM min: 60
RPM max: 320
To be used with: EDU2AE/TOP/TA
Model: PLUTO15CA/TA
Manual PLUTO Multilanguage 4-2017
Code: 133216/TA
Torque in/lbs: 17.7-132.8
RPM min: 60
RPM max: 320
To be used with: EDU2AE/TOP/TA
Model: PLUTO20CA/SR/TA
Manual PLUTO Multilanguage 4-2017
Code: 133221/SR/TA
Torque in/lbs: 26.6-177.0
RPM min: 50
RPM max: 200
To be used with: EDU2AE/TOP/TA
Model: PLUTO35CA/SR/TA
Manual PLUTO Multilanguage 4-2017
Code: 133236/SR/TA
Torque in/lbs: 26.6-309.8
RPM min: 40
RPM max: 140
To be used with: EDU2AE/TOP/TA
Model: EDU2AE/TOP/TA
Manual EDU 2AE-TOP-E_TA-SW ENG
Code: 032000/TOP/TA
Torque in/lbs:
RPM min:
RPM max:
To be used with: Any PLUTO../TA
Model: EDU2AE/TOP/NT/TA
Manual EDU 2AE-TOP-E_TA-SW  ENG  2017
Code: 031000/TOP/NT/TA
Torque in/lbs:
RPM min:
RPM max:
To be used with: NATO../TA Series