Electric Screwdrivers and more!
A Blackstone Global Company
Current Control Controllers for PLUTO Screwdrivers
This system allows parameters to be set up to control the torque and RPM profile for one program. The system is set up through a LCD display on the front of the unit. Changes to the parameters are performed by scrolling through the settings using four buttons.
Units available to support 1, 2 and 8 torque profiles.
EDU1AE: PLUTO Screwdriver Controllers |
|
|
|
This system allows parameters to be setup to control the torque and RPM profile for one program. The system is setup through a LCD display on the front of the unit. Changes to the parameter...
|
Thread Cutting Controllers |
|
|
|
The Parameter Delay Time enables the EDU1AE, PLUTO Screwdriver Controller, to run at it's full torque capacity for a pre-set amount of time, before downshifting to a final tightening profile. This ...
|
Recent Blog Posts
Jun 8, 2010
KolverUSA Releases Their 2010 Catalog
May 13, 2010
KolverUSA Expands Their Product Line with the Addition of the Torque and Angle System
Apr 5, 2010
KolverUSA Introduces DC-Controlled Angle Nut Runners
Mar 30, 2010
Linear Arm Maneuvers Slowly as the Arm Absorbs Torque Reaction
Mar 18, 2010
Telescoping Smart-Arm: Torque Location Sensor
Featured Model
EDU1AE/TOP/LTP
EDU1AE/TOP/LTP
The EDU1AE/TOP/LTP "Low Torque" MultiTorque Inspector
This system allows parameters to be set up to control the torque and RPM profile for one program. The system is set up through a LCD display on the front of the unit. Changes to the parameters are preformed by scrolling through the settings using four buttons.