Electric Screwdrivers and more!

Industrial tightening may require different control strategies and solutions. The most common cases are: torque control with angle monitoring and angle control with torque monitoring. Kolver T&A can manage all such strategies.

This system includes:

• The Torque and Angle readout (TAA)
• The EDU2AE/TOP/TA control unit
• The PLUTO15D/TA driver

The Torque/Angle Control:

The main parameters to be controlled are the tightening torque applied to the screw and the rotation angle of the screw, wth priority to the torque value. If the torque and angle values found by the system are within the programmed settings, the motor stops automatically and the indication of OK cycle (green led turned on) is given, otherwise an error (red led) is generated.

The Angle Control:

The main parameter to be controlled is the rotation angle of the screw. The motor stops automatically when the pre-set angle value has been reached and an indication of OK cycle (green led light is turned on) is given.

Main Features:

• Display shows torque value in Nm or in/lbs and angle in degrees.
• 8 different programs for custom joints with description
• Selection of factory pre-set joints (hard or soft)
• User friendly menu
• Nm or in/lb units
• Password protected