The new micro torque K-DUCER, the KDS-NT, is the latest addition to our transducerized screwdriver line and it's the most intelligent and cost-effective tool on the micro-torque market in the 0.4 - 6.2 lbf-in (i.e. 0.05 - 0.7 Nm) torque range.
Available in aluminium housing for automation or with start/reverse buttons or start lever for manual use, the new KDS-NT screwdriver works in combination with our KDU-NT controller, a sleek, ultra-compact control unit that includes all of our newest K-DUCER features. It can be supplied with or without table stand and can be easily placed anywhere!
The transducer inside the tool measures the actual calibrated torque applied to each joint at every tightening, ensuring accuracy and repeatability.
During all phases, critical factors are controlled and monitored: rotation angle, running torque and final torque.
For manual or fixtured applications, the KDS-NT micro torque screwdriver is always connected to the factory PLC or to robot PLC via IO cable, MODBUS or any other communication Protocol.
For more information, check out our KDS Nato brochure
Available in aluminium housing for automation or with start/reverse buttons or start lever for manual use, the new KDS-NT screwdriver works in combination with our KDU-NT controller, a sleek, ultra-compact control unit that includes all of our newest K-DUCER features. It can be supplied with or without table stand and can be easily placed anywhere!
The transducer inside the tool measures the actual calibrated torque applied to each joint at every tightening, ensuring accuracy and repeatability.
During all phases, critical factors are controlled and monitored: rotation angle, running torque and final torque.
For manual or fixtured applications, the KDS-NT micro torque screwdriver is always connected to the factory PLC or to robot PLC via IO cable, MODBUS or any other communication Protocol.
For more information, check out our KDS Nato brochure